View Full Version : Lighting, Filtration & Other Equipment
- How to add an internal overflow box in existing tank
- hydra aquatics biopellet reactor
- Reef Breeders Nano-lite
- Biopellet reaction
- Anyone get their AI Prime yet?
- Vortech vs Livestock
- Looking for new lights
- T5 supplement for Radions
- Hayward EC40 DE filter for 600 display?
- Denitrate ,purigen , phosban , matrix etc.
- API Liquid Test Kit
- Great another plumbing dual overflow thread
- Older AquaController JR w/ MP10's
- Old Model Coralife Turbo Twist 12x 36w Question
- Can you help me with a Chiller?
- Recommend a new skimmer 300g heavily stocked
- 75 Gallon Marineland Tank
- new maxspect razor
- Plumbing a nano after the fact?
- tunze 6040 /tunze 6020
- So over the skimmer !!!!!
- Help me pick a pump for return/manifold
- Peristaltic pump with Ca Reactor help
- gyre 130 or 150 in a 135 gal corner?
- 6 AI sol blues overkill? Opinions wanted
- 2x2bulb fixtures or 1x4bulb fixture?
- Reef Octopus Skimmer not producing bubbles
- Back to T5's
- mp10 on a 29gallon (30" long)
- 2 Hydra 26 or 1 Hydra 52.
- led or back to t5?
- bubbleblaster vs askoll
- Aquamaxx Reactor
- plumbing Jebao DC 12000 pump questions.
- To Fuge, or not to Fuge, that is the question.
- Hanna testing dream kit
- Dimmable T5 Retro Kit w/ Radions
- controller
- Red Sea C-Skim 1800 Or Tunze DOC 9430?
- Advice on Radion xr30w for RSM130D
- RO Membrane
- ATO/peristaltic question
- OK, Talk me into a Skimmer...
- Kessil or radion
- Maxspect razor 160w
- Skimmer placement question.
- Kessil output angle
- Minimalist approach to water flow, advice needed.
- Do Halide ballasts have a life span?
- Gate Valves under $20?
- Hammerhead pump help
- Aqua Medic KS 1000 Kalk Stirrer
- Throwing around a idea (plumbing)
- T5 Mod question
- How brite should I keep my led
- milwaukee refractometer
- 7 watt led bulb swapping resistors to run 12 watts
- MH Gurus
- Lights query
- BRS Jumbo Reactor for GFO??
- For those show switched to LED from MH
- Microbubbles
- Luxeon M PAR?
- help with my filteration...
- Could we be missing the whole picture on photosynthesis??
- New tank setup.Advice advance on plumbing pics
- Syncing 2 MP10's Non-Wireless - Wave
- Jebap WP 40 in a 40 breeder?
- T-5 Bulb Selection Help
- Hi LED fixture "have seen them all" experts please chime in
- buildmyled+aquaticlife 125 gallon
- Help with single hole over flow
- In Search Of A PC4
- Naturally lit tanks
- Fixing a HO fixture?
- Fluval fx6 for reef tank
- Ideas for lighting 16x16x16 cube
- Help!!! Ecoxotic Pan Pro RGB Module stuck on red
- Led shimmer got T5 setup
- frag swap frag tank set up
- 24 JBJ retro fit lighting
- Vortech mp10 solid red driver. HELP
- auto filling bubble counter
- Tank Structure Problem?
- Lights for a refugium
- New Build Lighting Dilema
- Are there any benefits or drawbacks to an oversized sump?
- Fluval Spec V ATO Suggestion
- Thoughts on Using a cone shaped inversion tank to mix salt water?
- hydra aquatics biopellet reactor pump recommendation
- Aquatic life Edge and Current LED lights
- Eshopps r-100 and 72 bowfront
- Looking to upgrade my Chinese led
- Jebao RW-4 Power Supply
- Diy 10g sump HELPPPPP
- EcoPlus Chillers (1/4 and 1/10 HP)?
- What length T5's for retrofit on 220G?
- Who's had chiller repair?
- MP10W QD grinding noise
- Tunze 9004 skimmer not skimming as it was??
- a little help/advice needed
- 72 Gallon Bowfront users
- Lighting a 210 gallon mixed reef
- 400 DE Pendant
- 360wes and bioactive 14g
- Ceramic bushing for DC Pump
- Lighting for 125gallon (mixed)
- blue appearance vs daylight appearance
- 110g Deep Blue tank setup price?
- Light spectrum advice for fuge (maybe used as algae scrubber in the future)
- To drill or not?
- Metal Halide Question
- Reef Octopus Diablo Skimmer Help (controllable DC Pump)
- Setting LED's on 225GAL
- Deltec MCE600 skimmer not performing properly
- Humidity Issues
- Wave Maker VS Clown Fish
- How level does an aquarium need to be?
- Eshopps hang on back protein skimmer PSK 75?
- LED power supply?
- Return for a 125 RR Mag12 or Mag9.5
- Heater and Apex
- RO DI Question
- GFO Requirements?
- Thumbs Up for the Vortech MP40wQD
- Anyone had their Jebao DC Return pump break?
- RW-15 problems.
- Heater Failure .... Twice!!
- BRS PVC Bulkhead Failures
- Digital heaters and thermometers
- AI Sol controller not working
- Raspberry Pi Controller
- Wp-40 controller light blinking at me
- anyone ever use a Red Sea Skimmer?
- Recommend A Skimmer
- Cycling valves
- polyethylene Tubing for dosing pumps? Yes/No
- Flow for 93 cube.. Please help
- Return Pump Suggestions
- Vertex Deluxe RO/DI
- Canister Filter Acting Up
- Jebao Doser Mounting Bracket?
- Reef angel or digital elite
- Frag tank help
- Skimmer questions
- Reef octopus owners, what model should I purchase? Help
- another please help choosing skimmer thread
- Refugium question
- 240g cube- what lighting ?
- Bulkhead placement
- A160 color and intensity question regarding acclimation
- Rodi housing stuck
- In wall 260 gallon return pump
- School me on RO/DI
- Bubble Magus Curve 5 Air Silencer Noise
- Oceanrevive T247 light
- lio51 skimmer
- Ecotech Radion for 29Gal Reef Tank
- Too much for 55gal??
- Best skimmer for 93 cube? Lots of choices lol
- Question on electrical outlets
- Vertex Puratek - what happens during flush?
- Is my tank ok?
- Carlson surge device question
- Skimmer for 30+ gallon reef
- Gotta give "Props" to Sea Swirl (Aquarium Currents)
- Return pump too close to drain?
- What kind of lighting is this that makes this fake reef look "somewhat real"? lol
- Ideas to add LED's to a T5 setup to pop anemone color
- BXRA Led and cooling
- ORP Probes
- Auto Shut-Off Valve Problem
- Red Sea Max 250 Skimmer
- Hanna Alk Checker
- Systems running Aquarium Engineering
- LF Ai nano
- Apex programs for BRS dosers- alk and calcium
- Would it look odd to have a Reef Brite LED strip just in the middle of a tank?
- sump light
- First try plumbing a sump
- T5 bulb combo
- think i made a mistake
- Lighting for 46ga Bow Front
- Chiller -RSM 650
- Actinic Supplimentation for my MHs
- Ai hydra 26
- Maxcap 2:1 180GPD
- Vertex Omega 150 Protein Skimmer
- Odyssea Metal Halide System DIY LED/T5
- Metal halide bulb for icecap ballast
- RO/DI Issues - No flow from waste line
- Lighting suggestions for 20x20x18 cube?
- Rodi aso
- Coralife SS 125 Leak
- $2500 budget - from scratch
- Drain and Return line pipe size...
- What do you think of this overflow design?
- AI Prime Pics Thread
- Reef Breeder Leds?
- reef octopus question
- 300dd return w/ jebao pump question
- 110g tank/sump size and return pump?
- ATI 6 Bulb Fixture
- Fluval FX6 - owners...?
- filter sock questiom
- Aquamaxx Hob-1 yellow hose size?
- Selecting an RO/DI unit
- heater sizing
- MH or LED?
- Lighting help sps tank
- supplementing kessil with hidden fixture?
- Sump Mod Question
- Reef Breeders or ATI Sunpower
- Buying ATI fixture used - 4 years old
- converting PC fixture to t5s
- American Made
- Pump Oscillator (DIGIMOTION+++)
- maxspect gyre 130
- Protein skimmer for 210 gallon?
- Why is the bashing of UV sterilization?
- GHL dimensions
- Quietone 6000 Question
- Kent Float Valve Problems
- The "trifecta" - Seagel+Purigen+Chemi Pure Elite...?
- LED lighting for 57g Illuminata
- recommendations on skimmer for 29g standard
- Help with light
- Deltec skimmer SCC1660 or SC2561
- Upgrade from Original Hydra to Hydra 26??
- Powerhead speed at night?
- EcoPlus chiller question
- Return Pump Suggestions
- Jebao DCT 4000 for 100G tank?
- MH help please...
- Reefbreeders Settings
- Looking for special power hub
- display tank -> drain line -> chaeto fuge -> sump ??
- Quieting down return pump
- Aquarium Auction 3/28
- JBJ ATO issues
- Fusion 40 w/ Radion Pro & T5 Hybrid
- Macro doing really bad
- ATO recommendation
- Radion xr30w g3 vs Radion xr30w g3 pro
- Need help with sump extension
- Aquamaxx HOB-1 Bubbles in tank - not micro.
- Quick Vortech MP-40 question
- Tanks
- Anyone using, or familiar with, the all-in-one Red Sea Max S series reef systems...?
- Reef Octopus skimmer
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.