View Full Version : Do It Yourself
- I've got BIG hands. How do I get the silicone in between the baffles of my sump???
- good frag tank
- 12 wire multi plug
- Cracked Solana - worth repairing?
- Need advice on bulkhead size for a BeAn overflow on 30 gal high
- Not 100% happy with my LED's DIY questions
- how thick do the glass panels have to be?
- Metal Halide temper glass.
- Where can I find a shelf like this?? OR How do I build one?
- how do you wire up t5 to an ice cap 660?
- Can you make a homemade sump/refugium out of a H.O.B power filter.
- Fug Plumbing - have a question
- Polishing Acyrlic
- Anyone DIY LEDs in their Biocube?
- Patents
- Tool to help with using Novus for scratch removal
- good sump idea?
- Coast To Coast With A Difference
- Now I Need Stand Help :)
- Do I need center braces with a 4X4?
- Something easy to move?
- Rolling sump
- Trying to find some small acrylic tanks
- External Overflow... I have some questions
- Easy Beginner LED Fixture Build Movies
- Unlevel tank
- My new project
- DIY Overflow
- Summoning help from my fello DIY'ers. Generator Switch
- Any "hoosiers" with an ro system....help????
- Should a tank be inset on top of stand?
- Is my floor strong enough?
- DIY protein skimmer
- Score! Gloat! Advice?
- DIY Canopy help
- Fan help
- Plans for first acrylic project. Refugium... Advise?
- ATS pros/cons
- Less than 12 LEDs on a Mean Well LPC-35-700?
- Question for all the LED users?
- Putty like material for reef stabilization?
- Aquarium safe black silicone sealant
- Float switch wiring....?
- my DIY vodka doser
- Connecting 2 overflow drains??
- Moonlight ideas?
- How to level sump on conrete floor?
- Built a sump using RTV 108. How long 'til I water test?????
- 55 Gallon Sump Setup...Need Help
- Would this Sump work?
- Bean Animal overflow system and basement sumps
- Woodwork: Looking for some help, ideas, plans on building a cabinet
- 150G LED Log
- Want to buy centipede elbows for tank inlet
- DIY Foam wall question:
- Tank resealing
- Dual sump drain design questions
- Please post pics of your plumbing!!??
- Removing Standard Overflow Box
- Testing for tempered glass for drilling
- Tank levelling? Help?!?
- Hanging light fixture
- chiller and calcium reactor?
- Sump dilemma
- can you have too many LED's
- LED Lighting custom for less then $43.99 or so
- drilling ?
- Temp controller in a room help
- How to mount filter socks??
- Deep Sea 140 plumbing question
- refugium/frag tank design
- pvc overflow
- Acrylic thickness question
- Help with Luminarc
- My DIY steel and wood stand
- Google sketchup the best?
- Rimmless Build, How Big?
- 75 gallon DT..looking for sump examples
- Tempered glass or not?
- DIY auto Shutoff for a return pump
- Drilling side of tank---WHERE do I drill?
- In the Wall Install
- DIY- LED on 75 gallon
- Burnt out Solaris Fixture Acquired
- Leaking 300 gal - reseal
- Glueing PVC
- Bear Overflow
- constructing canopy for ATI fixture?
- Help with my BK Mini
- Need help finding a sump tank that will fit
- DIY stand help for 29 DT and 20L sump
- stand/shelf building questions
- calcium chloride
- bubbles in tank
- Plumbing through hardwood flooring....
- UV Sterilizer on 12V DC - Advice required
- Best way to drive a single XP-G at 750-1000mA?
- Hose clamps?
- re-purposing a nanocube 12g as a sump
- T5 and LED's combo.
- clear PVC plumbing?
- tank leaking from unknown any ideas?
- Anyone got pictures of stands made out of steel?
- 90 gallon canopy
- DIY LED question
- led power supply question
- Any way to release pvc parts glued together?
- designing led setup for large 30" deep tank need help
- 10gal sump/fuge design
- Eggcrate frag holder
- 180g Stand Plans
- looking for ideas to support rock work
- DIY electronics revelation at the pawn shop
- Advise on tank swap
- Waterbug
- New 185 Reef Build. Need help.
- Overflow calculation for water level needed....
- Could this replace an overflow box?
- Return Line Plumbing - Tank Not drilled
- Wire mesh lid for nano reef.
- where did you get your cabinet doors?
- DWIZM (and all others)........Help!
- LED driver question
- DIY Live Rock Curing
- is there a way...
- Are XP-Gs necessary???
- Floating canopies
- How many LED's are needed?
- 90 gallon tank on larger stand.
- PWM controller vs. 0-10V regulator
- auto frozen feeder contoller help
- silicone quetion
- 350mA or 700mA?
- Sump Glass Thickness - Help
- Fake Rocks, Epoxy Resin??
- electrical plug/connector help
- DIY Open Concept 120g stand
- 29ga biocube HQI setup help
- Where/How to Ground...
- new LED array help
- ReefAngel PC Client Application Suite
- What about T5 and LED?
- FINALLY quieted down drain line down into sump
- PIC INSIDE : Fill in my sump picture with right water level.
- Calcium Reactor issue....
- In wall framing HELP!
- diy reactor
- how to make arches?
- New to the forum new acrylic tank project
- Mak3mydae's build thread
- Corner of tank not making contact
- My DIY kalk reactor PICS
- Aquascaped with lifted reef rack.
- Adding a bigger fuge questions on pumps
- Mag-12 pump w/ Mag-18 impeller?
- 300v 18awg for lamp cord?
- New to diy lights, help please!
- Meanwell ELN-60-48D Question
- major led dimming issues
- sand+silicone substrate???
- Is this even possible????
- Ready to silicone external overflow... Need tips...
- Closed loop hole spacing ?
- Lights = FIRE
- pvc overflow
- Keyhole Flanges - it can be done!
- Wooden Light racks
- DIY sump help
- Cheap substrate? (Lime stone)
- Lots of LED q's Building 3 Units
- Egg crate coral stand, (how to make?)
- Using the aquatronica dimming module for Mean Well LED driver
- DIY Auto topoff???
- DIY LED help,multimeter question
- Algae free acrylic pad on magfloat 350??
- Hofer Gurgle Buster vs. PVC 'Coast-to-Coast' OVerflow
- Looking for small diameter float switch
- Show me your stylish L brackets or racks!!!!!4 lights
- Tunze 9002 AirLine Modification
- Will my LED set-up work?
- Glass thickness for rimless 24x24x24, and 18x18x18
- Mitered edges in glass
- Calling all electrical-savy people for fan installation
- Aluminum Light Rack
- ELN 60-48 D only giving 26 volts?
- DIY external overflow build
- How did you make your External overflow?
- DIY acrylic sump question.
- Wire for LEDs
- Retrofit DIY LED lighting into canopy
- ATO question
- DIY Salt??
- Good place to buy acrylic?
- Hard plumbing and ShopVac
- Tank Seem Question
- My 240 Stand Project
- Should I reseam or not?
- new 75 and stand feedback welcome good or bad
- diy live rock????oyster shell
- ATO siponing question
- Remove Spackle From Wood Stand?
- pb new LED DIY
- Travertine tile safe?
- Fusing Acrylic to normal plastic?
- Do I need resistors ???
- 1/2 pvc overflow flow
- Help! How do i install these fans, wires and all ,into a fixture?
- Has anyone created a surface skimmer box for the areo force skimmer yet?
- DIY Kalk reactor ?
- Acrylic Guru's needed! Large tank build underway
- Led Build Question
- My hood needs T5s and LED moonlight.
- 6 Cree XP-G's on a Meanwell ELN-60-24D?
- Maristar fans.
- how to dampen pump vibration?
- wiring an MH socket
- Little Giant Pump (instructional)
- Pot and ALC?
- Two strings off one Meanwell?
- Drilling overflow & return: any limit for how close to the top edge that I can drill?
- sump build and return pumps questions??
- WWYD...stand for a hex aquarium
- simplest way to control speed of PC coolingfan
- Aesthetically pleasing refugium/sump?
- Herbie Method for double overflow boxes?
- 40R gallon tank for a sump
- test LED
- Will this stand support my tank?
- D sub connectors for LEDs. Need electric guru
- Glass not squaring up... Suggestion?
- Sump help
- Frag plugs
- Looking for a failsafe return design
- cheap fuge lighting
- RO/DI Solenoid Maintenance/Recommendations
- My first DIY sumps!
- mixing salt with external pump?
- Where to buy float switches?
- Theoretical tank questions
- Solaris Controller Cracked?
- question about attaching bulkhead fitting to rubbermaid can
- Diy Skimmers
- Is GE 2 outdoor glass and window silicone ok for using for sump?
- DIY HOB Fuge, help with design and setup?? Pic inside!!!
- Mean Well driver help!
- My DIY NP Pellets reactor
- Check this stuff out!
- DIY Eco-Smart'd TUNZE - Build
- DIY Syringe Doser !!! in Operation
- DIY PH Meter : Working
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.