View Full Version : Neptune Systems
- Welcome to our new sponsor - Neptune Systems
- pH and ORP readings way off
- AquaController III Maint & Care?
- Recording Data Logs
- Still problems with pH (and now temp) readings
- ORP probe - need calibration?
- Aqua Controller 1 probe placment ?
- programming
- Using a switch
- Aquanotes and XP home
- Can't see reports on Aquanotes
- Aquacontroller for Dosing Kalk
- getting the AQIII pro online??
- What's This 'Drip Cup' I read about?
- ? about AC3Pro Webserver
- Is it possible to have more than one on/off time
- AquaController Jr. Problems
- More than Heavy Duty modules same config?
- AquaNotes
- Temp readings is still off
- ORP probe storage solution
- Beta Testers Wanted
- Can you override ON/OFF settings?
- ENALY ozone generator
- DC4HD erratic behaviour
- ORP reading fluctuating with fluorescents on/off
- ORP Measurement
- How to programatically get Aquacontroller status?
- DC4HD or DC4?
- LED light for moonlights?
- Those using the Aquacontroller as a Wavemaker what pump are you using?
- Power Fail Alerts
- Is connecting a power strip into a noise filter the same as a DC4?
- AquaNotes 3.10 install fails with Path/File access error
- Differences between LAB and Standard probes
- Unused DC4 outlets
- DC4 updates
- leap seconds and SUN command questions
- Can multiple power line interface modules be used?
- ACIII Pro and email
- Will you consider adding a calcium probe
- AQII skimmer delay ?
- Is conductivity salinity?
- Had a small flood, need help
- Conflicting Commands
- ORP Probe Calibration
- Aqau III
- Should I use a AquaController
- pH (temp adjusted)
- AC Program
- is my system possessed?
- Upgrade from ACI to ACII
- new owner of aquacontroller
- Temp Probe Question
- Question about the AC Jr.
- Questions about AquaController JR.
- Cable for AQI to Computer
- Do all currnet Aquacontroller models share the same programing code?
- Random programing
- Aquacontroller Issues
- INSTEON becoming 'mainstream'
- aquacontroller issues
- ORP extremely high
- SERIPC9 stops data flow
- Possible to program differently depending on day of the week?
- Question About DC4's
- QUESTION REGARDING modify statement
- My fluorescent fuge light constantly flickers when off
- Aquacontroller Pro Temp Probe Issues
- wavemaker
- pH Calibration
- Conductivity Calibration
- Pager delay not working
- AquaController + Float Switch
- DC4 port numbers
- First AquaController Program
- Switch Delay
- Icecap Ballast
- AQ status problem
- Firmware cable for AC Jr
- Will this work?
- Can you connect a Chiller to the X10?
- ACIII IO controller
- Can you run Aquanotes 3.0 with a Aquacontroller I
- i need help to start with aqj.
- crazy temp fluctuations possibly caused by A4 ballast
- ACIII PRo programming ?
- Programming question - lower and upper limits
- Just a little help with ordering my program steps.
- Trying to get AQ to send email notification.
- Question re: my new Junior
- Difference between standard and lab grade pH probes?
- RS232 to Wireless?
- DC4 just melted down.
- Placement of Probes in Tee fittings...
- Aquacontroller Jr. and DC8
- Erratic ORP readings
- Statement Conflict?
- Programming Question.
- Connecting DC4 to DC8
- timer control
- Writing Program....
- aquacontroller or windows issue?
- Control modules
- Moon lights on Aquacontroller
- AC3 Pro unable to send emails
- Graphing Updated Timer Names
- DC8 soft start feature
- Backlit Question
- pH and ORP readings way off all of a sudden
- Controller email question
- Impressed
- AQI-Ozone not shutting off at set level
- Is it bad?
- AC Jr and power loss
- High ORP
- Wireless RS232
- Need help with x-10 module for my chiller
- Help me with my program
- Need help updating firmware
- DC4 phone cable.
- ACII or ACIII, that is the question
- Check room temp?
- Chiller is showing UNK?
- reseller question - hard to find items
- my settings
- Controller Interface
- Time and Date lost when power fails
- Somewhat of a stupid question....
- AC II or AC Pro?
- x-10 co2 problem
- This doesn't happen very often, but...
- programming question
- AC II acting weird
- Calcium Probe
- DC4 and possible fuse blown
- Running 2 DC8's on a AC JR
- Closed in July
- Possesed switches
- Please check your private messages
- Aquacontroller III Pro
- My pH keeps going up and up
- Neptune systems = great customer service
- Strange ORP readings ?
- AC III Pro Calibration Questions
- fluorescent light flickers every couple seconds when it should be off
- Is there a way to calibrate the non medical grade ph probe?
- Cant seem to access the order link....
- This is strange...........
- Cannot update programming
- DC4 and DC8 Questions
- Dc8
- lost date and time
- when extra ph probe for ac III
- pH Calibration -- Land of Confusion!
- DC4 Command Pass Through Issue
- X10 Modual
- Power outage
- Jr. with a DC8 & X10 ?
- Programming question
- ORP settings
- Serial cable or Ethernet cable?
- DC8 with CO2 regulator solenoid
- Ozone operation question
- Need a step by step instruction on getting the ACIII PRO Online
- AC JR Temp Error?
- Power outage with UPS
- ACIII lamp module
- Question on using my Ac with a 220v chiller
- ac jr. and dc8 green led goes out
- Your phones don't work
- Programming Question
- additional PH probes on ACIIIPRO?
- have anybody try to hook up AC with a Tunz stream?
- Firmware Upgrade Program
- A+ Customer Service!
- Can the AquaNotes connect via TCPIP to the Aqua Controller III?
- just start it my aq jr. and i have a problem:((
- can the aquacontroller use 2 separate temp or pH probes
- DC4 not working??
- AC and a UPS Backup Battery
- Aquanotes Problem
- Aquacontroller Jr Setup Suggestions?
- Cleaning ORP and pH probes?
- curt!! are u back?
- Programming Question
- AQIII PRO stopped logging data about 5 days ago-Need Help
- Macintosh and AC3
- Run-time error 383 and fast clock
- Does the JR work with aquanotes?
- Special functions Aq3
- ORP steady, not working
- acIIIpro tcp/ip questions
- acII pro - sporadic temperatures
- H2O change using ACIII?
- blown outlet?
- ACIII PRO Temp Probe is way off
- AC Jr. pH reading different from test kit
- AC3 alarm email
- Help! Blown DC4HD?
- ACII Brand new Temp probe Wrong ?
- Feed mode programming
- DC4 Control problem
- Lines of Code
- ORP probe affects PH reading
- DC4HD making noise when MH comes on
- Aquacontroller users, ORP calibration?
- Need some serious help!!!
- AquaNotes and public web interface
- Transporting probes for aquacontroller
- Temp and IceCap?
- how do you tell if the ORP probe is shot?
- How much better is an ACII vs the orginal AC?
- ACII for dummies please????
- I don't understand programing
- ACJR questions (newB)
- Able to add wireless RS232 to my AC2
- which controller to get
- dc8 problems
- programming help
- Question for the ACIII Programming Gurus
- ORP Probe, when to replace?
- Ive tried and tried, and cant get my flash updated.
- Blown X10 modules
- Programming problem
- Aqua II Problems
- Insteon vs. X-10 Alternative
- programming question
- new DC4 making noise
- Ballast issues with my Jr.
- AC Jr. manual
- Increasing SUN and RT of default program
- Aquacontroller question
- X-10 modules
- Aquacontroller jr pH ?
- AC III PRO battery backup
- AC2 problems/questions
- probes and readings question
- Hunted house from aquacontroller???
- DC4HD melted.
- weird ac jr behavior
- Running a DC4 21'?
- power outage email in program?
- AquaController II problem
- Temp/pH probe question
- Fustrated ACII , Temp ,Ice Cap,ARO and Vho
- temperature probe
- Getting email when the Alarm is not on?
- Is the ph probe 1/2"?
- Anyone use a wireless bridge?
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.