- 2 mp40w with 1 mp60
- Feed mode for extended time safe?
- 2 MP40w (Gen 2) placement
- Mp40 placement on a 300
- You need to work on your customer service
- gen 2 compatible with ES?
- MP10 noise
- MP40W 2nd generation
- MP40ES sqealing?
- no rubber pad on my dry side
- Service Spectacular... again
- MP40 Causing Sattelite Interference
- New MP-10 wet side keeps falling off.
- Mp40 or mp60
- 7x2x2 mixed reef 210g flow?
- mp 40 stuck in constant mode
- MP 40 power supply
- Slave only pump
- Dead power supply?
- big props to Ecotech
- Mp40 or Mp60? Purchasing one of these today
- Restoring factory settings on MP40...
- Adding another Vortech?
- mp40 es
- What do I do now?
- 4 MP40 and placement on a 150g DT
- MP10's on back wall of 180G
- Reccomendations For Placement In Half Cylinder Tank
- MP 40 W group, replaced one of 3 units, and now all three flash red only
- Brand new MP40 - Dead Power Supply
- MP10esW Brandnew propellar broken
- Suggestion for EcoTech
- another wetside down
- Length of Reef Crest / Lagoon Cycle?
- Which pump, 4 mp40 or 2 mp60?
- Demo of MP40 in my area? Max Expo?
- Cracked Washer
- Problem with setting EcoSmart mode (TSM or NTM)
- took the plunge
- email response
- Power Cord
- What todo..
- mp40 wetside spinning help?
- How loud should a new MP60 be?
- Pump placement
- Silent MP10, or maybe not.....
- Pump suggestions?
- MP40 or MP60 for 150gl Reef Tank
- MP10 Cleaning/Replacement Parts
- buying mp40 from ebay?
- Vortech MP10ES noise tolerance?
- Mp10
- MP60 stalled
- Blinking red light on MP40ESw
- Vortech recomendation.
- MP10 gen 2 red/green error
- Mixing Modes?
- Mp10w ES wave making
- MP40 and MP10 Pump Placement
- Is one mp10 enough for a 46 bowfront?
- Status show "Low Volt"
- Problem with ecosmart driver
- Easiest way to open the controller?
- MP60 Oil or fluid?
- Placement question on my 225 mixed reef
- Mp40w
- Compatibility
- the eternal question : 2x MP10 or 1x MP40 in 60g Cube
- Bad Battery Backup??
- possible noise deadening solution for mp40 in my setup...
- mp40 noise with video!
- How much wiggle should the magnet have on the wetside?
- Lifespan of power supplies?
- Maintenance Product Help
- Explanation of "Low Maintenance"
- Another which one question, 180 gallon
- 2xMP40wES Placement Puzzle - 36x24x24 90G Tank
- Magnetics not "sticking" on 90 g tank, MP40
- New MP40 wetside busted in less than 2 months
- my mp60W kept having vertex , please help
- MP20 controller question
- Rubber Spacer
- Vortech Q with Apex
- Origin and Manufacturing of Vortechs
- Voltage for the mp40 upgrade
- Night mode
- Stall condition but no error codes?
- Great Service
- Ntm
- Shipping cost on parts store?
- Wetside spinning completely
- Battery Backup
- Wetside spinning
- MP10 Wetside
- 3-MP40s Please recommend placement and setting
- mp40 wetside
- MP40 wet side making noise
- And yet another mp60/40 wave question
- mp40 wetside magnets stuck together
- Swapping ES with old controller from new gen MP40W
- mp40wes noise?
- Everyone's tank is different, need EcoTech's help!
- New user of Vortech need advice
- Wanting more flow
- Blinking Red
- Battery Backup contest
- Master/Slave
- Upgrading display. Upgrade vortechs?
- Wow!
- wireless
- Upset To Say The Least
- est model for my size tank
- super service.
- Large Tank Recommendation
- Vortechs for 185
- MP10 Wet Side Issues
- 6 mp40s or 4 mp 60s
- Vortech and Profilux 3
- Just got my first MP40w ES and it keeps sliding
- Placement of 3 MP40 in high tank.
- MP10 Rubber Spacer on 5.5 mm glass?
- 90 Gallon Setup - What Vortechs?
- 7500gph or 5500?
- Mode switches between white and red?
- Ice cap battery back up not working
- Mp10es able to slave?
- Hands-On Aquarium Enthusiast Needed for Brand-New Customer Service Role
- Coral
- parts shipment
- Wetside rebuild
- Question on MP60 and acrylic tanks
- Night mode problem?
- Problems with mp4w
- Mp10 size??
- 4 MP40's
- box to seal noise
- battery backup connection doesn't look right
- Battery backup
- 2nd set of MP60s and they still seem really loud. (>70db)
- 2x MP10's on one Battery Backup?
- 2 x MP 10s or 1 x MP 40
- Linking Non-Wireless MP10ES?
- Jammed MP40 pump
- Thank You Brett & Eco-Tech Marine
- My MP10s not syncing nor upgrading
- Pump Accidentally Dropped into Water!!
- 1st Power Outage and Backup Didn't Work
- Misaligned Mp40?
- Which Vortechs / Placement?
- Need help setting modes
- 2 mp10 or 2 mp40?
- Vortech Modes and Heat
- 75G Would 2xMP10wES be Enough or 1 MP10wES and 1MP40wES
- 1 or 2 MP40Ws
- 1 x MP40 or 2 x MP10
- Would 1 MP10 work?
- MP60 Installation
- Plastic coated magnet has broken for no reason.
- Reefcrest Mode Question
- Confusion with Ecosmart and Regular Vortechs
- Question on safety on MP60 and 12mm glass
- MP10 Not Working Any More
- Thank you Brett and EcoTech!
- Driver Swapping (MP10ES to MP10wES) How To?
- mp40 problem
- mp10 flashing red and yellow?
- mp40w and mp40wev difference
- Weird Situation on vortech mp40 and 60
- 2 MP10's or 1 MP40
- 2 MP10's or 1 MP40
- Using MP40 on 8mm glass
- Firmware upgrade mp40Wes
- Any information would be terrific!
- MP40 can't continuously pulse
- Can I still use this?
- Mp40 on bottom of tank
- Need help with MP40
- Considering Vortechs & I have some questions
- MP60's In Action!
- MP60 suitability
- 1001 Uses for the Ecotech Coral Glue
- Vortech mp40 original
- MP40wES on Back Glass??
- ecotech battery backup for mp60
- sale on Vortechs?
- Would 1 mp10 do it?
- MP10/40w connection
- MP 60 wire
- Vortech/Profilux Module not connceting
- Which Powerheads To Go With?
- WXM MP40W Apex Programming
- MP10w ES vs MP40wEs
- producing bubbles.
- Help setting up a group and id master and slave
- MP40 placement
- disturbing mp60 sound with video
- MP10 es Short Pulse Mode... interesting
- Mp40w buttons not responding
- MP10 wES or MP40 for 58 gallon
- Bent Shaft
- Battery Backup for Multiple Vortech Pumps
- Which pumps
- I have a ? Regarding Mp40
- What do I clean my Vortech MP10 wetside with????
- Mp40 power brick short
- vortech newbie question?
- MP10 overheating?
- MP 10 or MP 40? 1 each or 2 each?
- MP40ES Noise Advice
- Great Customer Support
- Stall condition - won’t reset?
- Fully Submersible Vortech?
- 2 X MP10s in a Current Solana 60
- Vortech MP40w Problems
- Battery backup question...
- MP10 and MP40 for 120G
- Power Supply Fried.
- Question about MP60
- Do I need another MP40?
- Battery Backup's Internal Battery
- mp10 on 3/8 acrylic?
- Pumping power loss on MP10 ES through thicker glass?
- 2xMP60 on a 72"x36"x24
- UPS for battery backup
- MP-10 issue
- MP10 ES went to red/green error mode
- MP10 Blinking White or Turquoise
- mp60es and mp40w
- TSM / NTM cycle time
- Can we use laundry machine to clean MP40 socks
- mp10 esw upgrade
- Dry side magnet question
- MP40w ES very loud noise
- MP10 for 40 breeder
- worried about pressure
- Single mp60 in a 72 inch tank
- mp-60's or mp-40's?
- mp40 and 60?
- flow for 185
- Got too close with a magnet.
- MP10 - Pump Disconnect Error Protection
- Need recomendation for Solana XL
- Need suggestions on vortech arrangements
- True back and forth flow possible with Vortecs?
- vortech mp20 without rubber spacer
- MP-20 clicking Noise
- MP40 Dry Side Extremely Hot to the Touch!
- mp40w prob
- Operating EcoSmart pumps controlled by Apex WXM module.
- MP40w Flashing red light, dry side problem