20 gallon high overflow

[danoreef]

does any one have and AGA 20 gallon high with holes drilled in it? becuase I am going to drilll holes for my overflow and closed loop and don't really want to start until I know that it won't destroy the integrity of the glass.

P.S. The tank is not tempered.

[MAKAVELI 77]

I just had my local marine store, drill my 10 gal overflow, i just have pvc pipe back right corner of tank. leading the water to the sump below. So u have to have the right tools to perform the job, very tricky. cant drill the hole to close to one another weakin the glass.

[beansbro1]

i just posted a thread for my upcoming tank . its a 20L i drilled 5 holes in it and slits for an external overflow . my current tank is the same thing w/o the external overflow been going for over a year now with no problems

[BLKTANG]

I just drilled a 20L,& a 29.The tank will b fine.

[danoreef]

makaveli77, That's what I afraid of

Beanbro, 5 holes? can you send me the link to your thread?

blktang, thanks for the reply I am going through with it the hole saws are on order

[BLKTANG]

<a href=showthread.php?s=&postid=8958175#post8958175 target=_blank>Originally posted</a> by danoreef
makaveli77, That's what I afraid of

Beanbro, 5 holes? can you send me the link to your thread?

blktang, thanks for the reply I am going through with it the hole saws are on order


I did it with a dremmel.bits were $8.00

[danoreef]

I ordered the bits from http://www.richontools.com/index.html I will try my luck with these I couldn't pass up the price.

[BLKTANG]

woah,guess not for $5.50,& they do 8,000 holes.

The dremmel bit only did 4 holes,& it was shot.

[beansbro1]

here is the thread. i used the dremel bits to
http://reefcentral.com/forums/showthread.php?s=&threadid=1016173

[MAKAVELI 77]

That will sure work good luck and happy reefing DANOREEF. I will say a prayer for u when u start to drill . Again make sure u dont drill to close. I am going To post pics of my tanks in a few days.