GenX CRM media - what pH are you running in your reactor?

[sodaman]

Tuning my new GEO calcium reactor and was interested in what pH everybody is running GenX CRM at?

I read that running a low pH in your reactor with low effluent flow is more advantageous with respect to lessening the effect on tank pH than running higher pH with more effluent flow. I am currently at 6.50 - 6.55 pH in my reactor using a controller and I figured I would now adjust my effluent flow according to my tank needs.

Any feedback on what pH you are running would be appreciated.

Thanks!

[bigt0706]

would also like any input

[redox]

at or below 6.9 is what I run my dual reactors at that are filled with gen-x crm:D