couple questions after set-up and running

[LFS_worker]

Its a ACIIIP with aquanotes 3.3

I need the program to be a little different on fridays is this possible??


also can I program what I want to turn off when the feed timer is pressed?

Can I have some examples of programing this??

thanks
Brian

[dougchambers]

The controllers don't have a way of knowing what day it is so there isn't an easy way of having a different program just for certain days of the week.

As for feed timer settings, here is what we have in our program;

If FeedA 000 Then RET OFF (Set for 30 min while I feed)

If FeedB 000 Then RET OFF (Set for 30 min while I feed)
If FeedB 000 Then VHO ON (Also turns the VHOs on if I'm home late)

If FeedD 000 Then STR ON (Manual stir routine for Kalk Reactor)

The full program and timer set can be seen here;

http://135reef.chambersohana.com/Equipment/ac3.html

[LFS_worker]

If Time > 08:30 Then PC1 ON
If Time > 18:30 Then PC1 OFF
If Time > 08:31 Then PC2 ON
If Time > 18:30 Then PC2 OFF
If Time > 08:32 Then PC3 ON
If Time > 18:30 Then PC3 OFF
If Time > 09:00 Then MH1 ON
If Time > 18:30 Then MH1 OFF
If Time > 09:01 Then MH2 ON
If Time > 18:30 Then MH2 OFF
If Time > 09:02 Then MH3 ON
If Time > 18:30 Then MH3 OFF
If Temp > 82.0 Then COL ON
If Time > 09:03 Then MH4 ON
If Time > 20:00 Then MH4 OFF
If Time > 20:00 Then MH5 OFF
If Time > 09:04 Then MH5 ON
If Time > 20:00 Then MH6 OFF
If Time > 09:05 Then MH6 ON
If Temp > 84.2 Then COL OFF
If Temp < 79.0 Then HET ON
If Temp > 79.5 Then HET OFF
If pH > 08.20 Then CO2 ON
If pH < 08.00 Then CO2 OFF
If TmpA > 84.0 Then COL OFF
If pHA1 < 06.80 Then CO2 OFF
If Temp > 84.2 Then COL OFF
If Temp > 84.5 Then ALM ON
If TmpA > 84.2 Then COL OFF
If pHA1 < 07.20 Then CO2 OFF
If Temp > 85.9 Then PC1 OFF
If Temp > 85.9 Then PC2 OFF
If Temp > 85.9 Then PC3 OFF
If Temp > 83.5 Then MH1 OFF
If Temp > 83.5 Then MH2 OFF
If Temp > 83.5 Then MH3 OFF
If Temp > 84.0 Then MH4 OFF
If Temp > 84.0 Then MH5 OFF
If Temp > 84.0 Then MH6 OFF
If Time > 00:00 Then TNZ ON
If Temp > 60.0 Then PM1 ON
If Temp > 60.0 Then PM2 ON
If pHA1 < 08.00 Then CO2 OFF
If FeedA 000 Then TNZ OFF


error reads line 44-> If FeedA 000 Then TNZ OFF Expected cycle

It is registered but I still cant see chiller on and off cycles on the graphs either...

please help ;)
Brian

[laurentm]

The "If FeedA 000" statement is a new feature of firmware v3.2. You can get it from this link: http://www.neptunesys.com/manuals.htm