PDA

View Full Version : 2" bulkhead fitting actual hole size


techrider62
02/25/2007, 12:56 PM
What is the actual hole size?I drilled my hole for the bh with a 3" hole saw but the bh fits very sloppy in the hole.I measured the bh and is 2.70" not 3" is this right?Which means that it is leaking.

Acrylics
02/25/2007, 02:28 PM
The actual hole size can vary from mfr to mfr so it's best to drill the hole to fit the bulkhead. There are 2" bulkheads which require a 3" hole, might have to hunt around a little for that though.

HTH,
James

techrider62
02/25/2007, 02:37 PM
It says right on marine depot website that the it requires a 3" hole