300g and wave box question

[svb57]

I have just put on the stand a 300g tank with (2) 6x6 corner overflows. I have purchased a Tunze wave box and am wondering how these two over flows in the corners are going to work?

Any sugestions?

Thanks
Jim Mc

[rvitko]

The overflows will reduce the waveheight and they will be noisy from water splashing into them. It will still work but I would use a durso pipe to help raise the water level in the overflow and reduce the noise from splashing.

[svb57]

Would eliminating the corner overflows and going with a "coast-to-coast" over flow work better?

Thanks
Jim Mc

[rvitko]

Not sure what you mean by coast to coast, the ideal is an overflow centered on the backwall.

[svb57]

I mean I could build an overflow box the length of the back wall.

Jim Mc

[rvitko]

Centered on the back wall is really the ideal, a full length overflow would reduce wave height, since the center stays constant it gives the best results to have the overflow there.