RobbyG
03/09/2007, 05:22 PM
Got this info from Aquatronica and thought it would be useful to all the owners. The Question, what has priority over what has often been asked and answered, but this is the definitive list for up to Ver 5.0 software. Note it might change with later updates.
Our system utilizes a “hierarchical” type of logic. In other words, each type of program is part of a priority scale, there could be a program that can override another type, or it can be overridden by other types of programs. Here is the scale, starting from the manual switch found on the PU and manual commands which override them all:
1. Manual switch/manual commands
2. Function Keys
3. XY Programs
4. Level switch programs
5. Temperature programs
6. pH, Density, Redox, Freshwater Conductivity
7. Power-cut
8. Wave effect
9. Tide effect
10. Timer programs
If two programs of the same priority are made on the same plug, the program that turns ON the plug will have priority over the program that keeps it OFF.
- If you would like to use 2 or more level sensors in the same program, you should know that there is a priority given to the sensor that was first connector
Our system utilizes a “hierarchical” type of logic. In other words, each type of program is part of a priority scale, there could be a program that can override another type, or it can be overridden by other types of programs. Here is the scale, starting from the manual switch found on the PU and manual commands which override them all:
1. Manual switch/manual commands
2. Function Keys
3. XY Programs
4. Level switch programs
5. Temperature programs
6. pH, Density, Redox, Freshwater Conductivity
7. Power-cut
8. Wave effect
9. Tide effect
10. Timer programs
If two programs of the same priority are made on the same plug, the program that turns ON the plug will have priority over the program that keeps it OFF.
- If you would like to use 2 or more level sensors in the same program, you should know that there is a priority given to the sensor that was first connector