Need skimmer help

[fuzz1974]

I have used a aqua c remora for a couple years now, in the beginning it ran like a champ, then it started to taper off. 8 mos ago I added another MJ1200 with the use of a tee, hoping to up the production. It worked for awhile then tapered off again.

I am pretty good about cleaning it out ( the injector) It produces nice bubbles but little skimmate. I clean the neck and the collection cup at least once a month. The nylon screw in the injector is set where there are about 3-5 threads before it is screwed all the way in.

Anyone with any tips or info would be appreciated.


Thanks in advance,

Fuzz

[fuzz1974]

Anyone

[skey44]

get something new... jk... hmm i have had one about two years and always seen the same results tea skimmate(not bad) and not much of it(bad) ready to upgrade on new system. are you cleaning the pumps? maybe try a run through with vinegar? thats what i would try don't know the correct answer here

[USC-fan]

A vinegar bath might help. 10-20% vinegar in water and let the skimmer run in it for 24 hours.