PDA

View Full Version : setting on 7095...when 2 6100s on same side


benf
03/27/2007, 06:08 PM
Because of cosmetic reasons, i have both 6100s on the same side of the tank, I have on b/o a nano 6055 for the other side. Anyhow, til the nano arrives, what setting is recommended for 2 on the same side? The book shows sequential, but at the same time show 4 pumps hooked up. Any suggestions when only using 2? I need to maximize flow so the SPS on the far side get adequate flow.

thanks
Ben

benf
03/27/2007, 07:06 PM
After posting, i decided to experiment...it is set to Pulse, settings are 30-100% with a 3sec interval.....any thoughts

rvitko
03/28/2007, 09:22 AM
I would use pulse or Interval 2, if you use pulse it would be interesting to invert the pulses so one pump is doing 100-30 and the other 30-100.

benf
03/28/2007, 09:40 AM
Thanks roger...will give it a try...didnt realise i could do that!