30 rpm pump

[skriz]

what is the power consumption of the 30 rpm pump? Also, do you have any headloss specs? I need to run a 30' line from the resovior to the sump; will this work.

Also, I read somewhere that these pumps should be setup to "suck" the water rather than "push"; is this correct?

thanks

[Snarkys]

Max. Fluid Pressure: 30 psig (2 bar) 10 psig (0.7 bar)
Max. Suction Lift:
0.8 and 1.6 mm ID 16-ft (4.8 m) H20 16-ft (4.8 m) H20
3.0 and 5.0 mm ID 25-ft (7.5 m) H20 25-ft (7.5 m) H20
Flow Range: See ordering table(page 2)
Accuracy: ±5% full scale
Repeatability: ±5% full scale
Max. Fluid Temp.: 93ºC (200ºF)
Duty Cycle: Continuous
Operating Temp.: 0 to 50ºC (32 to 122ºF)
Enclosure: open motor systems; ABS optional
Wetted parts: Silicone, Norprene® or Viton®
Power: 100-130Vac; 210-240Vac; 3.5W
Dimensions (W x H x D): 60 x 70 x 66 mm (2.4 x 2.8 x 2.6 in.)
(with housing) 84 x 140 x 97 mm (3.3 x 5.5 x 3.8 in)
Weight: 260 g (9.2 oz); 570 g (20 oz.)
Shipping Wt: 0.45 kg (1 lbs); 0.9kg (2 lbs)