Qris
05/06/2007, 06:41 PM
My 4 months old Tunze 9010 is producing a lot less skimmate lately, and the flow from the output is dramatically reduced. So I took the unit apart and noticed one of blades on the impeller is touching the base. Can this be the problem? Pictures below.
http://63.116.152.67/chris/img/tunze1.jpg
http://63.116.152.67/chris/img/tunze2.jpg
http://63.116.152.67/chris/img/tunze1.jpg
http://63.116.152.67/chris/img/tunze2.jpg