PDA

View Full Version : Aqua Notes and Jr


djultra
05/23/2007, 09:14 PM
Temperature and pH are not being automatically retrieved from the AquaController Jr and entered into the database. Do I have something set up wrong.

clp
05/24/2007, 10:28 AM
Please check these two items; one or both is probably the problem:

- On the config tab of the Database->Tank Database window make sure that record datalog is checked.
- On the same window make sure that the Serial # field matches the AquaController serial number. The AquaController serial number can be found on the AquaController's self test screen.

When these are set correctly perform a Database->retrieve datalogs; when complete you should have data in the database.


Curt

djultra
05/24/2007, 06:38 PM
Both of those are correct. Under reef status the temp and ph is correct, but its still not logging it in the database. Even after I told it to retrieve.

djultra
05/25/2007, 03:41 PM
I was able to get it to work. But I have to hit the retrieve datalogs button, then shut the program down and restart it and the info would be there.

Is this normal?

clp
05/29/2007, 12:10 PM
No, that is not normal. AquaNotes retrieves the datalogs once per hour. You must wait at least that long before the data is retrieved.

Curt