PDA

View Full Version : easier brackets for the tunze nano skimmer/ nano cleaner...


dga
07/18/2007, 01:08 AM
all that own a "tunze" nano skimmer or filter know how difficult the brackets can be to install and actually hold the product. if you own any of the magnets from tunze or the generic one elsewhere, can install it to the back of the filter thereby eliminating the bracket that comes with the product and holds much better. if one wants even a closer fit to the back wall the magnet can be positioned inside the filter. in the photos below i positioned mine outside the housing with 2, 4-40 nylon screws. i fitted the vertical bracket on the left side of the filter where the attachment points are so that i can run the pump power cord behind it for a clean look...






http://farm2.static.flickr.com/1289/843823928_a40a53a7cd.jpg?v=0

http://farm2.static.flickr.com/1118/843823972_42e17c241a.jpg?v=0

http://farm2.static.flickr.com/1322/843823968_addc76e036.jpg?v=0

http://farm2.static.flickr.com/1201/843823938_abe79e0e42.jpg?v=0