Bull_Auger
07/26/2007, 09:16 PM
I have an 120 gal tank that I am trying to get setup.
I have taken the center support due to my lights, and decided to put two supports even from center for light penetration.
During my leak test of the setup, water was 2 inches from the top and the two supports that i had gave way due to lack of using the proper glue or epoxy.
I was wondering what can i use, that will stand up to this type of pressure on the outside walls.
I have to two pieces of plexiglass, that is trying to be glued to a top trim of the aquarium.
thanx
Bull_Auger
I have taken the center support due to my lights, and decided to put two supports even from center for light penetration.
During my leak test of the setup, water was 2 inches from the top and the two supports that i had gave way due to lack of using the proper glue or epoxy.
I was wondering what can i use, that will stand up to this type of pressure on the outside walls.
I have to two pieces of plexiglass, that is trying to be glued to a top trim of the aquarium.
thanx
Bull_Auger