PDA

View Full Version : Both streams dieded


shoman89
08/04/2007, 09:11 AM
Had a power outage last night and there was a major surge that tripped a bunch circuits in the house. Afterwards my stream 6200's would not work. The power supplys were hot, the drivers I couldn't touch and the 7095 was not lit up. Visually the inside of the drivers look ok. What would you suggest I start will replacing, the supplies? Also, what are the voltages I should see at the outputs on the plug on the supply?

Thanks,
Jeff Painter

Pseudo69
08/04/2007, 09:17 AM
Sounds like you fried the circuit boards. This can happen in instances of power surges(power company) and lightning strikes.
You might have to have the electronics replaced. You may want to think about putting them on a surge protected outlet for future use.

HTH

Aquadepot
08/05/2007, 07:26 AM
Hi Jeff,

Power surges can cause major damage to the Stream drivers, as I am in Australia can not offer quick parts support, Roger will be able to help you with repair and replacement parts please PM Roger for a diagnostic.
I hope any costs can be covered by your insurance,

Regards
Graeme