RO/DI Membrane

[ASaleem91]

Hey,
I was in the market for a membrane and was wanting to upgrade from a 75gpd membrane to a 100gpd membrane, is that possible or do you have to get the same gpd rate on the new membrane?

Thanks,
asaleem91

[melev]

You need to make sure it will fit your membrane housing, and the flow restrictor must be matched to the membrane.

[Buckeye Hydro]

<a href=showthread.php?s=&postid=10578529#post10578529 target=_blank>Originally posted</a> by ASaleem91
Hey,
I was in the market for a membrane and was wanting to upgrade from a 75gpd membrane to a 100gpd membrane, is that possible or do you have to get the same gpd rate on the new membrane?

Thanks,
asaleem91

You can switch from a 75 to a 100. What brand of system or membrane do you have now?

Realize that when you go from a 75 to a 100 gpd membrane you'll get a bit more water from the membrane but the rejection rate of the 100 gpd is about 6 to 8 % less than the 75 gpd.

If you need more production and you want to stick with the high rejection we have a 150 gpd membrane w/ a 98% rejection.

Russ

[Buckeye Hydro]

Ali - I responded to your PM but your mailbox is full.

Russ