PDA

View Full Version : 9010 stopped working


Maeda
08/19/2007, 04:45 PM
I ran a few errands today, and was out for about 3-4 hours.

When I got back home my 9010 was off. It refuses to turn back on. I pulled the pump out, and the impeller won't spin.

The impeller is free but won't budge. It doesn't even attempt to move.

What happened? :(

Aquadepot
08/20/2007, 08:22 AM
Maeda,

Without seeing the pump its hard to say can you give a little more detail the age of the skimmer, is it tank or sump mounted etc.
Check the assembly of the impellor also try disconnecting the electric and cool to check that it has not been jammed and overloaded.
I am unfamiliar with your location? if based in the US Roger will be able to service

Regards
Graeme

rvitko
08/20/2007, 09:54 AM
PM sent! Please respond ASAP.

Maeda
08/20/2007, 12:17 PM
PM responded!

The skimmer is only a couple months old, configured for in sump, and had been working great until today.

Maeda
08/24/2007, 08:40 PM
THANK YOU ROGER!
Great prompt service!

My 9010's back on track!