PDA

View Full Version : Question about my 7095


Waxxiemann
08/20/2007, 04:36 PM
How can I tell weather night mode is working or not? There doesn't seem to be any indication of weather it's active or not. The reason I ask is because I run other night time LED's and I am curious weather or not it is functioning.

I am currently using interval 2 with 2x6100's.

Thanks.

rvitko
08/20/2007, 05:10 PM
In night mode the pumps stop pulsing and stay at the bottom knobs settings.

Waxxiemann
08/20/2007, 06:10 PM
OK, thanks Roger, I'll give it a try tonight and let you know how it goes.

You are saying on the little LED indicators that tell me how high the pumps are running it will stay on the lowest then is this correct?

Thanks again,
Waxx

rvitko
08/21/2007, 09:59 AM
During the day it pulses between the two speeds you have set for each channel, at night it will stay at whatever the lower knob is set to- if that is 100% the pumps will be at 100%.

Waxxiemann
08/21/2007, 12:15 PM
OK, I see. Thanks again Roger, I'll play around with it and let you know. =)

Waxxiemann
08/21/2007, 12:20 PM
Whoops, double post.