LM3 Questions

[lecher]

Hello,
I just purchased a LM3 and have a couple of questions. Do the in and out lines attached to the unit have to face up or can they be rotated down and if so which screws should be removed to do so, the 3 on the round part or the 4 on the square part? Also, what is the output jack labeled A for? I thought you could only add 2 more pumps.

Thanks,
Rob

[SpectraPure]

You can remove the 4 corner screws and rotate the entire pump/motor assembly. Be careful not to strip the screws when re-installing.

Some customers use the LM3 to control three devices other than our dosing pump, such as bigger pumps , relays and solenoids. Plugging something into that jack will cutout the internal pump.

Scott
SpectraPure, Inc.

[lecher]

Thanks for the info.

Rob