C02 regulator question

[Elliott]

I had my C02 tank refilled today and can't get my regulator to work, don't know if there is a reset or what is going on. I simply took the regulator off, went and had the tank filled, returned and hooked it back up, opened the tank valve and plugged in the electrical cord to the valve to give it power (open) but no C02 is coming through, tank is full, any ideas?

hope this is the right forum, figured most large tanks run a CR

[gary faulkner]

What do the pressure gauges read?
Should have two gauges, one for amount of co2 and other for working pressure.

[Elliott]

just went out there to look at the guages and it's working fine, go figure, I'm wondering if there is a auto reset on it or something like that

[gary faulkner]

Don't think so....

= )

[bag151]

Try plugging the solenoid directly into a wall outlet, You should hear the solenoid click open. If not its sized shut or is no longer functioning. You can also try removing it and seeing if you get flow through the regulator.