PDA

View Full Version : programming ACJR

notajr.fan
10/02/2007, 07:19 PM
Just got my ACJr today and I'm having difficulty seating up the heater on/off function. If anybody could explain it in simple terms as I have little computer knowledge.

Thanks in advance,

-Jeff
htbrdd
10/02/2007, 07:34 PM
i have mine set as
if temp < 79.0 het^ on
if temp > 79.5 het^ off
hope that helps
notajr.fan
10/02/2007, 08:19 PM
how did you get to that page which allows you to set the temps, i've been messing with this thing to no avail. Any help would be appreaciated
htbrdd
10/03/2007, 05:44 AM
setup/timers/timer program then scroll down to set up heat. or you can add program from the same timer menu.
Wrench
10/03/2007, 06:36 AM
You will program whichever port on your DC8 your heater is plugged into. Let's say your heater is plugged into A04. Rename A04 to HET^. You may need to add a state if one for temperature doesn't exist.
notajr.fan
10/03/2007, 08:13 AM
Thanks guys, I was able to program the heater and lighting, I'll worry about the rest when I get back from my trip.