How to get 3/4" ID vinyl tubing to fit on a eheim 1250

[db_triggerfish]

I have a Eheim 1250 which i on planning on using as my return pump on a 75g RR tank, but i am unable to figure out how to get 3/4" id tubing to attached to output of pump. The 3/4' tubing goes in to the AGA 3/4" bulkhead. Big Thanks,

[CruzinKim]

http://www.marinedepot.com/ps_ViewItem~idProduct~FT7334.html
Insert Fitting - 1/2 inch MPT x 3/4in Insert
http://www.marinedepot.com/IMD/250/FT7334/FT7334_99.jpg

[luke33]

Or you could go to lowes, home depot or menards and get the same piece for .59 in the plumbing section. Take a small piece of hose with you to make sure it fits.

[RWillieK]

Boil it until its soft, and then stretch it with a pair of pliers.