PDA

View Full Version : Tunze 6100 vibrating at low speed

vdubfiend
11/07/2007, 09:37 PM
I have two of these and when one of the two goes to 40% (or anything other than 100% for that matter) it vibrates/buzzes loudly. The tank is in wall- accessed by a door in the next room and it still can be heard through the tank..

any ideas??

thanks!
rvitko
11/08/2007, 10:30 AM
You either have a loose bearing or a damaged bearing. Try removing the bearing bush and upper bearing, check them for any calcium build up or damage and reinsert them being sure the bearing bush is in all the way. These are parts 3000.62 and 3000.61 respectively.
vdubfiend
11/08/2007, 11:35 PM
can you provide some diagrams or something that shows the parts mentioned?

THANKS!
vdubfiend
11/08/2007, 11:49 PM
found what i needed on the site ...
thanks roger

do u have the pieces in stock if i need to order?
TIA
rvitko
11/09/2007, 10:17 AM
Yes.
vdubfiend
11/10/2007, 12:39 AM
took it apart soaked, cleaned and reassembled...

still is the same

roger can i get 2 of each of the parts you mentioned?

thanks!
rvitko
11/12/2007, 10:06 AM
Yes, PM me your address and what parts you need.