PDA

View Full Version : positioning


RonsterNYC
11/18/2007, 07:57 AM
Hello. I just purchased two with the wireless driver. I have a 120g Oceanic tank with two overflows - one at each corner at the back of the tank. I am due to get my pumps tomorrow and I am planning on positioning one pump at the left front of the tank going from left to right and the other on the right rear of the tank (in front of the over flow) going from right to left. They will be set on the pulse mode. The left front will be the master pump and the right rear will be the slave on anti-sync. Does this make sense or should I place both pumps facing one another on each side of the tank?

Thank you.

EcoTech Marine
11/20/2007, 07:24 AM
That configuration makes perfect sense and should work great. I would space the pumps at least 4-6" from the front and rear panes of glass (or the overflow in the case of the right pump) to make sure that they have enough room to breath.

-Tim

RonsterNYC
11/20/2007, 07:29 AM
I placed them about two inches away from glass and overflow...excellent pumps. Love them!!!! Thanks!

RonsterNYC
11/21/2007, 09:42 AM
Love these!!!!!!!!! Awesome products! Very quiet, cool, and very streamlined (inside the tank).