Mounting the battery backup?

[prugs]

I just received my new vortech with the WWD, & battery backup.

I couldn't find any info on mounting the battery, or directions for hooking up the unit inside the box. I noticed there are holes in the back of the cover. But if I mount the battery to a surface they will be blocked. Are these holes in the back cover neccessary for ventilation, or are they just tabs bent in to hold the battery in place?

I was going to mount the battery vertical to a wall with the eletrical connections/plugs at the bottom, is that OK?

[EcoTech Marine]

There are six holes on flanges on either side of the battery; Those are for mounting. On the wireless wave driver there are four small holes also for mounting.

Vertical mounting is good, that's how most people do it.

-Tim

[King-Kong]

How are you supposed to get a screw through those tiny holes on the side of the WWDs??

I just bought some #4 screws, and they are too wide to fit!

What size screws do you guys use to get through those TINY holes on the WWDs? The old wired versions were much larger.

[King-Kong]

nevermind; the #4s just didnt fall in, but had to be screwed into the holes.

all is mounted and well, now :)