PDA

View Full Version : Recommendations


Charlie's Angel
11/26/2007, 10:08 PM
Have a fairly new acrylic 375 that are mostly softies and LPS. Some SPS rught now. Want to start selling some of these and moving to an SPS dominant tank. Tank measures 96x30x30 with two corner overflows. I am new to the tunze's and am looking for help on what to get.

Thanks

rvitko
11/27/2007, 09:12 AM
I would suggest 2 6201's and a multicontroller.

Charlie's Angel
11/27/2007, 12:33 PM
Great...Should I locate them on opposite corners. Also, tank is 96x30x30. Does the height change anything?

rvitko
11/27/2007, 02:02 PM
The height is fine, I would place one in each back corner.

Charlie's Angel
11/27/2007, 02:24 PM
Thanks..Should they be facing each other our out at an angle or is it a preference thing?

Charlie's Angel
11/27/2007, 02:30 PM
One last question...Can I attach these with the suction cups. Tank is acrylic.

shawnz28
11/27/2007, 04:05 PM
It is kinda preference thing, there really is no perfect way to place them every time. It can depend on rockwork, supplemental flow, and coral placement. You might end up trying a few slightly different placement combos before being happy with the outcome even at times.

As for the suction cups they really are not an option for a pump this powerful. Usually most people find the optional magnets to be the way to go for ease of use. Do you know the thickness of the aquarium walls?

Charlie's Angel
11/27/2007, 05:07 PM
The magnets won't work on one side of the tank as it is flush against a wall. The tank is acrylic - would the magnets work for acrylic. It only mentions glass usage on marinedepot.

shawnz28
11/27/2007, 05:21 PM
Yes the magnets will work on both glass or acrylic. There is a mounting system that can be used (roger is more familiar with the possibilities)... Does the tank have a large eurobrace? Another option might be hiding one in a stream rock.

Charlie's Angel
11/27/2007, 08:25 PM
Great...I could do a magnet on one side I believe. The tank does have a large eurobrace. I also think I can attach the mounting system to the sides. Anyone know more about this?

shawnz28
11/27/2007, 08:41 PM
I dont have alot of hands on but this might help give you some ideas
http://tunze.com/fileadmin/gebrauchsanleitungen/x3000.2688.pdf

Charlie's Angel
11/28/2007, 03:20 PM
Thank you