Maximum length of 4 socket control cable?

[elzool]

I'd like to place a 4 socket powerbar in a location about 35 ft ( 10 meters) away from the controller.

Should there be any problem controlling this strip?

[AQD_ottawa]

Not that i am aware of

[elzool]

Great to hear, thanks!

[remember]

I spoke to a French-accented guy from Aqua Digital and he told me he would ask the manufacturer this question. I tried a 25-ft 6-wire cable from Radio Shack and no dice. Is there a long cable available from Profilux?

[AQD_ottawa]

:rollface: :lol: :lol: FRENCH ACCENT!!!

ENGLISH ACCENT THANK YOU!!!!

Only french I know is between myself and my wife :lol:

I have been asked if im Australian before but never french.

I asked you to drop me an email so i could reply with the answer but never heard back?

[elzool]

so since a 25ft long cord won't work according to remember.... any suggestions on a 35ft run?

[Matthias Gross]

10m are no problem.

Important: The extension cable must be 1:1, no crossover!

[Chrisrush]

Richard, I can confirm that 2 x 25' lines coupled together will work. I had to run an extension from my laundry room where the dosing pump is to my tank, more than 25' away. I just used a standard coupler (6 pin - 6 pin) and it worked like a charm.

[elzool]

Excellent news Chris, thanks. I may no longer need to place an entire 4 socket bar at a distance. I may be able to accomplish what I wanted with a dual digital timer/outlet setup. But if I cannot find such a contraption I will just put a powerbar in its' place.