PDA

View Full Version : need link on how to make a durso pipe


pepino
12/06/2007, 07:16 PM
can any body post the link for me i drill my tank and need to do the pipe that goes inside the overflow to make it not loud
thanksoverflow question

pepino
12/06/2007, 07:42 PM
its anybody there that can helpe me with this

FishTruck
12/06/2007, 08:00 PM
http://www.dursostandpipes.com/BuildYourOwn/tabid/54/Default.aspx

pepino
12/06/2007, 08:19 PM
thanks alot

pepino
12/06/2007, 08:20 PM
hey can i find the parts at homedepot or lowes

Altpers0na
12/06/2007, 08:26 PM
for mine durso ish , i just put a T connector inline with my drain w/ the open end pointing up...

nanoDude
12/06/2007, 09:48 PM
<a href=showthread.php?s=&postid=11331524#post11331524 target=_blank>Originally posted</a> by pepino
hey can i find the parts at homedepot or lowes

Yep. They should both have everything you need. The HDs around here are better equipped so I would try them first but the parts you need are pretty basic.

trueblackpercula
12/07/2007, 04:56 PM
check my gallery

pepino
12/07/2007, 06:00 PM
thanks alot for all your help guys
hope to start my plumbing this week

mokeyz
12/07/2007, 06:21 PM
Also, the "reverse" durso did it for me as even with the regular durso in the overflow I still had lots of noise in the sump.

http://home.nc.rr.com/stockmanreef/reverse_durso.htm

pepino
12/07/2007, 07:38 PM
hey monkeyz did you did that durso pipe in your tank if you did you think you can send me a picture i cant understand the diagram thanks

mokeyz
12/08/2007, 05:11 PM
Pepino, I will try to take a picture for you - the reverse durso is in my sump where the overflow from the tank enters the sump. I just copied the diagram of the link I put in my message and it is now silent.

Marlene

pepino
12/08/2007, 07:27 PM
ok thanks alot hope to hear from you monkeyz