paradise471
12/11/2007, 03:09 AM
Recently, I have purchased a Red Dragon 800.
I don't believe it's functioning correctly. The reason is stated below:
1. As usual, the pump was immersed in the water, then I plugged the electrical cord. The pump ran normally.
2. I unplugged the cord while the pump was still in the water, then replugged it again. The pump didn't start.
3. I emptied the water out and repeat step 1. The pump started working again.
4. I measured the electrical input and output. Both had abnormal readings. They were 1.55 Amp and 1.65 Amp. If 1.65 * 115V = 190 W, this doesn't not match with what's labeled on the pump, 72W.
Could anyone tell me know if this is normal for the Red Dragon 800?
I don't believe it's functioning correctly. The reason is stated below:
1. As usual, the pump was immersed in the water, then I plugged the electrical cord. The pump ran normally.
2. I unplugged the cord while the pump was still in the water, then replugged it again. The pump didn't start.
3. I emptied the water out and repeat step 1. The pump started working again.
4. I measured the electrical input and output. Both had abnormal readings. They were 1.55 Amp and 1.65 Amp. If 1.65 * 115V = 190 W, this doesn't not match with what's labeled on the pump, 72W.
Could anyone tell me know if this is normal for the Red Dragon 800?