PDA

View Full Version : tunze??


khoivo1
12/18/2007, 11:35 AM
hi,,i am still debatting,,either tunze or vortech,,,so please let me know what is best tunze set up for my new tank 63x30x24 210g tannk
mix reefs,,, would one wave box enough?? do i need any controller for the wave box?/ if not then how many pump that i need and what model are they?? thanks

rvitko
12/18/2007, 02:35 PM
Where is the overflow box in the tank? How much room do you have for a wave (distance from water surface to top of the tank).

killagoby
12/18/2007, 02:43 PM
Love my 6101 and single controller. From what I've heard the waveboxes work well if you have the space to put them in a tank.

khoivo1
12/18/2007, 04:14 PM
the tank is from elos,,,right corner side overflow box,,just one box, and the water surface is about 4" to the top,,,,topless,,,rimless tank,,, thanks

rvitko
12/18/2007, 04:28 PM
I would use a wavebox and 1-2 6101 with a controller. It just depends on the type of corals you will keep.

BreadmanMike
12/18/2007, 05:05 PM
Fliger has a similiar Elos tank 62x32x24 or something like that. He's running 2x6201's and the wavebox.

khoivo1
12/19/2007, 01:37 AM
ok thanks

khoivo1
12/19/2007, 01:42 AM
Roger ,,,can you tell me the size of the wave box?? and do i need a magnet or it come with the magnet??
i have 6080 magnet ,,will it work? on wave box,,,thanks

rvitko
12/19/2007, 10:27 AM
The wavebox should be used with two magnet holders. If the glass is less than 1/2" thick the 6080.50 will work. It is about 4.75" square and 12" tall.

khoivo1
12/19/2007, 03:51 PM
i have two magnet 6080 but the tank i am getting is 25mil,,,is about close to 3/4 ,,,,if it doesn't work then,,does wave box come with anything to hang like the tuzne skimmer??

rvitko
12/19/2007, 04:12 PM
Then you need the 6200.50 magnets. It does include clamps like the skimmer and if this is a european tank without bracing the holders work very well on such tanks.