feed wont work?

[mr pink floyd]

after upgrading my firmware to the newest (3.30 for non serial port AC jr.)

my feed cycles dont work. i have them programmed all matching, but when i set it to feeda, no pumps turn off...


any ideas?

[dhoch]

Questions: (west hartford... which high school: Conard, Hall or one of the privates... I grew up there)

Do you see it actually go into feed mode? (i.e. feed mode time left)

What is your feed mode time set at?

Have you updated your program from feed to feedA?

Listing your feed program will probably be helpful.

Dave

[mr pink floyd]

im a chieftan ;)

your right, i thought something was different, it doesnt go into feed mode, it just goes back to the normal screen.

the feed mode time is set at 10 minutes, both are set as FeedA

programing is

If FeedA 010
Then KR1 OFF
If FeedA 010
Then KR4 OFF

feed interval is 010min

[dhoch]

That was my high school... many moons ago :)

So you push the down button for feed mode and wait and it just goes back to the normal screen?

Dave

[herb11kigoma]

are you selecting feeda? there are at least 4 feed modes a, b, c and d.