Feed cycle repeats itself ???

[Steve 926]

Hello To All

I am using an AC Jr, with the feed cycle set for 12 min.
There is no other Pgm. or 2nd feed cycle added to this.

The feed cycle is operated manually when I press the lower button on the controller, & the duration is for 12 min. no daily timer is set into the pgm for it

Occasionally the cycle will restart itself for another 12 min after completing the first 12 min ????

I do not see anything in the controller programing indicating a repeat cycle.

I have tried powering down the unit to possibly reset a glitch in it,
but it still doe's it occasionally.

Any Idea as to What's Causing This Would Be Appreciated !!!! :confused: :confused:

Thanks

Steve 926

:smokin:

[clp]

I suspect that you are holding down the 'down' button for more than .5 seconds and it is going into auto repeat mode. So you see 2 back to back feed cycles. Just one quick press of the button is all it takes to start the feed cycle.

Curt

[Steve 926]

Thanks Curt.
I'll give it a try.

I appreciate your advice & the customer support of your product's.

Just one of the many good reason's, to continue to use Neptune products.

Thanks Again ;)

Steve 926

:smokin:

[Steve 926]

Works great !

I"ll be gentle on the button's from now on

Steve 926

:smokin: