Wavy Sea with Tunze mount options

[Brian Peterson]

I have just puchased a Wavy Sea plus along with the Tunze Steam mount (from Wavy Sea). And a Tunze 6080 Stream to mount to it.

Most pics of the step ups I have seen. The Wavy Sea mount
for the Steam is actually just mounted to the output of the Wavy Sea. Thus plugging the output and only utilizing the Wavy Sea as a rotator for the Steam.

My hope is to use the mount to rotate the stream and use the Wavy Sea as a return also.

Might there me anyone out there that could post pics of their ideas they used for this type of setup?

Thanks

[ReefRockerLive]

Depending on the size of your tank, you could simply buy a 1" PVC Tee and maybe a 45 degree elbow to direct the flow from the return. I have my Tunze connected to the wavysea using their Tunze mount and the piece that connects to the coupling is a very tight fit. You shouldn't have any problems with this, unless your pushing lots of pressure through it, then and only then the pressure from the return may drop the Tunze.