PDA

View Full Version : acjr feed mode

flinster
03/21/2008, 08:51 AM
I have a tunze nano stream hooked up to my acjr. When I start the feed mode, I have to unplug the stream and then plug it back in to get it to stop. Is this normal? The other pumps (eheim) turn off fine.
kenargo
03/21/2008, 09:23 AM
It sounds like the pump is drawing a very low amount of power which causes known issues with the DC8. Move the pump to port 4 or 8 on the DC8; these ports are wired differently than the other ports and can handle low-draw devices (don't forget to update the program).

Note: The DC8 must have a S/N > 9000.
flinster
03/21/2008, 09:41 AM
That did it. THANKS!!!!