PDA

View Full Version : Tunze 9010 Not Producing Foam


BaxterS80
04/20/2008, 09:30 AM
I have been running our Tunze 9010 for over 6 months and it has been working wonderfully. Yesterday, it stopped producing any foam and the water is coming out of the four drain holes directly under the cup. It has been running since yesterday morning with no foam...Help!

dave2184
04/20/2008, 01:19 PM
Venturi pluged mabey. Try blowing through the air line if air goes through stick the end into the water for a few and let it draw water in to clear any salt buildup.

rvitko
04/21/2008, 10:57 AM
The drain pipe is likely inserted too deep or the sponge is above the top of the pipe. The sponge must be below the top of the pipe.