How to assign S7-S12

[ac green]

I currently have 2 powerbars daisy chained together. I thought the system would automatically pickup S7-S12. I have illumination one set to S1 and illumination 3 set to S7.

The issue I am having is that when illumination 1 turns on, it turns on both S1's on both power bars, illumination 1 and 3.

I am sure I just have something basic setup incorrectly!

Please help

[AQD_ottawa]

You need to program each power bar, standard is S1-6 so you need to plug the other into port S1-4 and program it.

You will find this info in the manual
Best wishes
Michael

[ac green]

thanks michael...guess i did not understand that when reading thru the manual