Spectrapure MaxCap Water Ratio At 58 degree

[reefwisher]

What would be my waste/ ro/di ratio with my pressure at 70-75 psi and my water temp at 58 degree. I have heard 4 to 1 but what temp and pressure are they talking or does it make any difference?

[flyyyguy]

the output will be lower with colder water and less pressure...but the wast to product ratio will and should be more or less the same.

Im no expert...but thats how I understand it.

I have the maxcap 60 gpd unit though and my well is about 42-45 degrees at 50 psi. I get about 40 gpd of product

[nancymccall]

could you wrap your main feed line around you hot water heater before going into the unit?

[flyyyguy]

the low output really doesnt bother me and I have over 300 gallons of reef. thats what storage containers are for .

If I had an accident and needed 200 gallons NOW....the fact that it could make water 150% faster wouldnt help a bit.

[reefwisher]

Thanks I was hoping not to have to adjust the waste all the time.