TDS meter 'err' code

[djfrankie]

Is it done?

This is a dual tds meter and one of the sensors reads fine the other gives me an err code.

Any ideas?

Thanks,
djfrankie

[BuckeyeFS]

That doesn't sound good. Let me check with my technician at HM Digital. Is this a DM1 or a DM2?

How long ago did you buy it?

Russ

[djfrankie]

<a href=showthread.php?s=&postid=12614794#post12614794 target=_blank>Originally posted</a> by BuckeyeFS
That doesn't sound good. Let me check with my technician at HM Digital. Is this a DM1 or a DM2?

How long ago did you buy it?

Russ

It's a DM1 and it was bought over 3 years ago.

TIA,
djfrankie

[BuckeyeFS]

Please replace the batteries. If that doesn't do it, clean the sensors (with a cotton swab with rubbing alcohol), reinsert the probes in the proper alignment, and re-calibrate the meter.

Russ

[djfrankie]

<a href=showthread.php?s=&postid=12621022#post12621022 target=_blank>Originally posted</a> by BuckeyeFS
Please replace the batteries. If that doesn't do it, clean the sensors (with a cotton swab with rubbing alcohol), reinsert the probes in the proper alignment, and re-calibrate the meter.

Russ

Will do.

Do you sell the calibration solution?

Thanks for your help!

djfrankie

[djfrankie]

<a href=showthread.php?s=&postid=12621049#post12621049 target=_blank>Originally posted</a> by djfrankie
Will do.

Do you sell the calibration solution?

Thanks for your help!

djfrankie

Just found it in your website.

thanks,
djfrankie