PDA

View Full Version : Hose clamps


Pattylucylaura
06/05/2008, 12:25 PM
Is it ok to use metal hose clamps on something that will be in sump or should I try to find some Nylon ones?

newty
06/05/2008, 12:55 PM
Depends. Would they be in contact with water? If the clamps are not submerged, touching water frequently or rust will not be a problem, then I think it is OK.

Shawn

Pattylucylaura
06/05/2008, 01:43 PM
No they would be submerged I figured they would rust but was wondering if it would be that bad to the tank.

Ehgemus
06/05/2008, 03:12 PM
don't do it!

http://www.marinedepot.com/ps_searchItem.aspx?IdCategory=&SearchText=plastic%20hose%20clamp&parsed=1

Pbrown3701
06/05/2008, 03:13 PM
extremely bad for the tank. use plastic

Pattylucylaura
06/05/2008, 03:22 PM
Thats what I thought just wanted to make sure.

kcress
06/05/2008, 03:41 PM
For aquariums I frequently use good quality nylon tie wraps, not the crummy cheap-o polycorbonate ones found at some hardware stores.

They work quite well.

sabbath
06/05/2008, 08:16 PM
You can use these.
http://titan-marine-hardware.com/titanium-hose-clamps.htm