customcolor
06/05/2008, 09:09 PM
well enspired by the maxi mod (i have never done it yet to a maxi) i desided to try this on a little that i had laying around for like 5 years. to help me out with this i used another part from a nother power head that i got off ebay that was a 220v and didnt run right even with the converters i have tryed.
well on with the pics. this is the 220v pump that didnt work worth s***. never got spinning, just pounced(sun sun's vibration 600gph :()
http://i152.photobucket.com/albums/s193/customcolor/10.jpg
now the little pump. a aqua pump 1.
http://i152.photobucket.com/albums/s193/customcolor/13.jpg
just to prove to you how old this is. the tags are almost off it :( i wanted to see the watts on this, but i bet you its around 10 or so. i could realy use a kilawatt right about now!
http://i152.photobucket.com/albums/s193/customcolor/12.jpg
i was going to try to use the prop and magnet from the sun sun cuz by my saprize it droped right in and the mag was the same size as the one in the little pump. the magnet from the sun sun was lots stronger the the old one (may be do to how old it was) the sun sun prop sat kinda nice i thought even though it was low but with the shroud i made for it it would have ben fine(thats next)
http://i152.photobucket.com/albums/s193/customcolor/11.jpg
well off to the shroud.
since the pump is nice and small i was able to use a peice of 2"pvc cut to about 3/4" and weld on16 it to the cover that was on the pump after i cut most of it up and left the outer ring cuz thats where it cliped on to the little pump. so yes i can take off the shroud very easly. for a bridge to keep the the prop in i used a thinly cut 2" pvc again and made some groves in the shroud and weld oned it.
http://i152.photobucket.com/albums/s193/customcolor/9.jpg
http://i152.photobucket.com/albums/s193/customcolor/8.jpg
http://i152.photobucket.com/albums/s193/customcolor/7.jpg
well this is what it looked like together.
http://i152.photobucket.com/albums/s193/customcolor/6.jpg
well on with the pics. this is the 220v pump that didnt work worth s***. never got spinning, just pounced(sun sun's vibration 600gph :()
http://i152.photobucket.com/albums/s193/customcolor/10.jpg
now the little pump. a aqua pump 1.
http://i152.photobucket.com/albums/s193/customcolor/13.jpg
just to prove to you how old this is. the tags are almost off it :( i wanted to see the watts on this, but i bet you its around 10 or so. i could realy use a kilawatt right about now!
http://i152.photobucket.com/albums/s193/customcolor/12.jpg
i was going to try to use the prop and magnet from the sun sun cuz by my saprize it droped right in and the mag was the same size as the one in the little pump. the magnet from the sun sun was lots stronger the the old one (may be do to how old it was) the sun sun prop sat kinda nice i thought even though it was low but with the shroud i made for it it would have ben fine(thats next)
http://i152.photobucket.com/albums/s193/customcolor/11.jpg
well off to the shroud.
since the pump is nice and small i was able to use a peice of 2"pvc cut to about 3/4" and weld on16 it to the cover that was on the pump after i cut most of it up and left the outer ring cuz thats where it cliped on to the little pump. so yes i can take off the shroud very easly. for a bridge to keep the the prop in i used a thinly cut 2" pvc again and made some groves in the shroud and weld oned it.
http://i152.photobucket.com/albums/s193/customcolor/9.jpg
http://i152.photobucket.com/albums/s193/customcolor/8.jpg
http://i152.photobucket.com/albums/s193/customcolor/7.jpg
well this is what it looked like together.
http://i152.photobucket.com/albums/s193/customcolor/6.jpg