Lunar lights not working

[455cutlassdave]

I just got them a few days ago. They will not come on using the program but were working fine the first few days. When I first plug in the power they flash on real quick so I konw they are getting power.

Any ideas?

David

[kenargo]

Try using 'manual on' and 'manual off' to verify that the lights work. What program control are you using; 'If Moon'?

If the above works then you might be expecting to the moon to come on when the lights are out, which is not always the case, moon rise/set sometimes comes in the middle of the day in which case it is possible to have no moon light on the tank for the night (depending on moon cycle).

[455cutlassdave]

I tried the manual on/off and no response. I am not using if Moon I am using

If Time > 19:00
Then LT3 On

It was working fine for 3 days then just quit with no other changes.

David

[kenargo]

If manual on/off is not working it points to a connection/power problem or device failure. Check the obvious; lights, power and wiring.