got a leak

[gary smith]

hi there i have now built a cabinet to put my maxcap 90 in i have noticed a small leak between pod 1 and 2 i did`nt notice it before as i had it on a draining board.
as i live in the united kingdom i was wondering if i can repair this myself as the post and packing would be very expensive to the us thanks gary

[SpectraPure]

I'm sorry for the hassle. I think we used some too-thin tape for a couple of days some time ago and our typical 3-4 wraps didn't make it. If you would, remove the 8 screws holding the two heads to the bracket. Un-thread the nipple from the heads. Clean off then re-apply 6-8 turns of the typically-thin teflon tape to the nipple threads and re-connect.

Let me know if you have any more problems.

Apologies again,
Scott
SpectraPure, Inc.

[gary smith]

ok scott will do:D gary