PDA

View Full Version : Eheim 1262 on a Bermuda 3c


Gdubb
06/22/2008, 03:23 PM
Should I hard line the Eheim to 3c and put a vavle so I can control the flow or should I just soft line and not worry about it?

The skimmer will be ran externally.

thanks

mojo~
06/22/2008, 05:19 PM
ITs up to you. I might try it with flex and see what you get. I run mine wide open but I am only using a mag 7 on it. I think you will be ok. You willjust have to adjust yourgate valve to adjust your water level.

Left Coast DJ
06/22/2008, 06:25 PM
Even if you run it externally, you can still put a ball valve between the vinyl tubing: Ball Valve (http://www.drsfostersmith.com/product/prod_display.cfm?c=3578+10090+8016&pcatid=8016)

Gdubb
06/22/2008, 06:34 PM
<a href=showthread.php?s=&postid=12800268#post12800268 target=_blank>Originally posted</a> by Left Coast DJ
Even if you run it externally, you can still put a ball valve between the vinyl tubing: Ball Valve (http://www.drsfostersmith.com/product/prod_display.cfm?c=3578+10090+8016&pcatid=8016)

thanks!

chilwil84
06/22/2008, 06:59 PM
soft with ss hose clamps to start