Need some pretty quick help,

[Saldarya]

I was doing some maintenance and the Temp probe got knocked loose from teh controller. It appears that this caused the alarm to go off turning off the lights.

Although this is a good thing, now the lights wont come back on.

Temp is reading within range and the chiller is working fine.

The sockets that the lights are attached to show 'off' and I can turn them on manually.

Thanks in advance.

Bobby

[Saldarya]

Well, for the moment I simply disabled the Temp dependent lighting channels.

That being said, even after logging out and back into the software, if I turn on that channel to be temp dependent, then the system turns the lights off even though the temp is within range.

I am good for teh moment, but woudl appreciate soem help on how to reset the alarm i guess.

Thanks!

Bobby

[boboxx]

once the light go off froma temp directive they will not come back one until the next day.... even if temps gose down.

[Saldarya]

<a href=showthread.php?s=&postid=12862136#post12862136 target=_blank>Originally posted</a> by boboxx
once the light go off froma temp directive they will not come back one until the next day.... even if temps gose down.

There ya go!!!

Thanks!

Bobby

[boboxx]

psssst.... it's in the manual :c)

I know because I had the same issue3 weeks ago!