PDA

View Full Version : DIY conductivity probe for salinity measurments


mkzimms
07/19/2008, 12:09 AM
anyone have plans or a reference for building a DIY conductivity probe? i'd like to use it to calculate salinity.

WindowMaker
12/10/2011, 11:31 AM
Id love to see this one too!

WindowMaker
01/08/2012, 08:12 PM
found one!

http://www.practicalmaker.com/ec/diy-ec-probe

djmx2002
01/27/2012, 04:24 PM
Hi, It seems like that Endraw from practical maker stopped working on that EC cuircuit because it wasn't stable and he wasn't able to get it to work.

I could prototype and test it but i don't have a conductivity probe...

WindowMaker
01/30/2012, 09:34 PM
Ive seen several concepts for ec/ppm boards. This is on my list for somewhere down the road, but far from the top of the list. I've found a good source for ec probes so I will grab one or two of those eventually.

djmx2002
02/01/2012, 06:23 PM
What is your source for Ed probes? I was thinking about ordering the marine pinpoint probe from eBay for about 60 or to get the Ed kit from as

KRavEN
04/09/2012, 08:10 AM
Hi, It seems like that Endraw from practical maker stopped working on that EC cuircuit because it wasn't stable and he wasn't able to get it to work.

I could prototype and test it but i don't have a conductivity probe...

Where did you find that info? I didn't see anything on his page and he's selling the EC pcb there. Would be interested to know because I'm getting ready to start an I2C temp/ph/orp/ec board based on some of his circuits.