GPhiAce
07/29/2008, 10:46 AM
I would like to know where is the optimal place to place my temp and pH probe (for the ACjr)? Also, where should the heater be placed? Where should the ATO refill line be placed?
my setup- 40br drilled on the left for an overflow. There is a baffle to seperate the corner of the tank with the overflow from the tank. Sump is in the stand. Skimmer section, followed by a single baffle to the refug, followed by 3 baffles to the return section. No Ca reactor. Open back hood and stand with 250w MH and 2x39w T5 plus an energy saver bulb for the sump. One oscillating house fan for air circulation in the hood.
My thoughts are to place the temp probe midway down the display tank in the back, behind the rock. heater and pH probe will go in the return section of the Sump.
my setup- 40br drilled on the left for an overflow. There is a baffle to seperate the corner of the tank with the overflow from the tank. Sump is in the stand. Skimmer section, followed by a single baffle to the refug, followed by 3 baffles to the return section. No Ca reactor. Open back hood and stand with 250w MH and 2x39w T5 plus an energy saver bulb for the sump. One oscillating house fan for air circulation in the hood.
My thoughts are to place the temp probe midway down the display tank in the back, behind the rock. heater and pH probe will go in the return section of the Sump.