yeniraki
08/10/2008, 06:36 AM
I tried both venturi types on my DIY skimmer and wanted to share it with you.
http://reefcentral.com/gallery/data/583/1129322mazzeismall.jpg http://reefcentral.com/gallery/data/583/112932meshsmall.jpg
The first picture was the original config of the skimmer with 2 mazzei injectors(one on the feeding pump another on the recirculating).
Second picture, single recirculating pump with 8 layers of mesh (enkamat), feed by overflow.
First config: The air and water intake was more than the second config, I had to decrease the air in both injectors due to canon on the neck as the neck diameter is 6 inches. Major problem encountered was locking up of the recirc pump due to liming. Every 2 or 3 weeks I had to disassemble and clean the calcification on the rotor. I killed 3 Resun pumps (18000l/h) in 6 months.
Second config: My major concern about this config is the watts that pump draws, 700watts. The only good thing about such size pump is, although the height of the skimmer is 163 cm (~5'5'') it aspirates air that a 6'' neck cant take. Again I have to decrease the air intake on the venturi. As you can see on the picture the body of the skimmer is pure white although it is made of clear 6mm acrylic. The bubble size is very fine indeed.
I should I go for a 8'' neck maybe? Would Spazz or Hahn would be kind enough to help me out?
The other skimmer on the pictures is Schuran jetskim 250 with 12000l/h Reddragon pump.
http://reefcentral.com/gallery/data/583/1129322mazzeismall.jpg http://reefcentral.com/gallery/data/583/112932meshsmall.jpg
The first picture was the original config of the skimmer with 2 mazzei injectors(one on the feeding pump another on the recirculating).
Second picture, single recirculating pump with 8 layers of mesh (enkamat), feed by overflow.
First config: The air and water intake was more than the second config, I had to decrease the air in both injectors due to canon on the neck as the neck diameter is 6 inches. Major problem encountered was locking up of the recirc pump due to liming. Every 2 or 3 weeks I had to disassemble and clean the calcification on the rotor. I killed 3 Resun pumps (18000l/h) in 6 months.
Second config: My major concern about this config is the watts that pump draws, 700watts. The only good thing about such size pump is, although the height of the skimmer is 163 cm (~5'5'') it aspirates air that a 6'' neck cant take. Again I have to decrease the air intake on the venturi. As you can see on the picture the body of the skimmer is pure white although it is made of clear 6mm acrylic. The bubble size is very fine indeed.
I should I go for a 8'' neck maybe? Would Spazz or Hahn would be kind enough to help me out?
The other skimmer on the pictures is Schuran jetskim 250 with 12000l/h Reddragon pump.